[SOLVED] Blue/grey roads/surroundings

Hi all,
I’ve got a problem with my PCM 2013. Since the beginning of November PCM doesn’t work properly. Every time I load a stage the road and/or the surroundings are blue or grey. Like this:

[spoiler][img=http://thumbnails101.imagebam.com/28728/1d3212287274035.jpg] [img=http://thumbnails103.imagebam.com/28728/a10891287274074.jpg] [img=http://thumbnails108.imagebam.com/28728/cc2ba5287274108.jpg] [img=http://thumbnails107.imagebam.com/28728/df55ef287274152.jpg] [img=http://thumbnails107.imagebam.com/28728/d41907287274199.jpg][/spoiler]

Very annoying. Could someone help me? This is what I already did + the DxDiag of my computer.
• Windows 8.1 update after the problems started
• Clean install didn’t work
• Officialrelease didn’t work
• Daily database didn’t work
• Updating the drivers didn’t work (but I think the problem is in here, maybe not the right drivers?)
• Run as admin didn’t work
• Capability mode didn’t work
• Deleting the game cache didn’t work
• Highering/lowering the settings didn’t work

[spoiler]
------------------
System Information
------------------
Time of this report: 11/26/2013, 08:54:58
Machine name: MATTHIEU-PC
Operating System: Windows 8.1 Pro met Media Center 64-bit (6.3, Build 9600) (9600.winblue_gdr.131006-1505)
Language: Dutch (Regional Setting: Dutch)
System Manufacturer: Dell Inc.
System Model: Inspiron 620
BIOS: BIOS Date: 09/29/11 19:14:07 Ver: 04.06.04
Processor: Intel(R) Core(TM) i5-2320 CPU @ 3.00GHz (4 CPUs), ~3.0GHz
Memory: 4096MB RAM
Available OS Memory: 4078MB RAM
Page File: 1498MB used, 6676MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.03.9600.16384 64bit Unicode

---------------
Display Devices
---------------
Card name: AMD Radeon HD 6450
Manufacturer: Advanced Micro Devices, Inc.
Chip type: AMD Radeon Graphics Processor (0x6779)
DAC type: Internal DAC(400MHz)
Device Type: Full Device
Device Key: Enum\PCI\VEN_1002&DEV_6779&SUBSYS_909D1B0A&REV_00
Display Memory: 2807 MB
Dedicated Memory: 1015 MB
Shared Memory: 1792 MB
Current Mode: 1440 x 900 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: Philips 190CW
Monitor Id: PHLC018
Native Mode: 1440 x 900(p) (59.887Hz)
Output Type: HD15
Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1230 (English)
Driver Version: 13.152.1.8000
DDI Version: 11
Feature Levels: 11.0,10.1,10.0,9.3,9.2,9.1
Driver Model: WDDM 1.3
Graphics Preemption: DMA
Compute Preemption: DMA
Miracast: Not Supported
Hybrid Graphics GPU: Not Supported
Power P-states: Not Supported
Driver Attributes: Final Retail
Driver Date/Size: 10/8/2013 15:01:02, 1237200 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B71EE2-2439-11CF-747C-97B0BEC2C535}
Vendor ID: 0x1002
Device ID: 0x6779
SubSys ID: 0x909D1B0A
Revision ID: 0x0000
Driver Strong Name: oem23.inf:cb0ae4141c60964e:ati2mtag_NI:13.152.1.8000:pci\ven_1002&dev_6779

-------------
Sound Devices
-------------
Description: Luidsprekers (High Definition Audio-apparaat)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: HDAUDIO\FUNC_01&VEN_14F1&DEV_50A1&SUBSYS_102804ED&REV_1001
Manufacturer ID: 1
Product ID: 65535
Type: WDM
Driver Name: HdAudio.sys
Driver Version: 6.03.9600.16384 (Dutch)
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: 8/22/2013 12:38:21, 395776 bytes
Other Files:
Driver Provider: Microsoft
HW Accel Level: Basic
Cap Flags: 0x0
Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No[/spoiler]

Thanks in advance,
Matt

[FocusTechSupport]

Please reset the graphics settings:

1. Open This PC thenLocal Disk (C:).
2. Open the folder Users then your Windows username folder.
3. Open the folder AppData (*) then the folder Roaming.
4. Open the folder Pro Cycling Manager 2013 then the folder Config.
5. Delete the file Options (or Options.xml).
6. Run Pro Cycling Manager 2013.

(*) The AppData folder is an hidden folder by default. To view this folder, click View then Options.
Click the tab View and check 'Show hidden files, folders and drives' under 'Hidden files and folders' in the 'Advanced Settings' window.
Click the button OK.

Thanks! That worked